banner
Search
PRODUCT CATEGORY
Shear Cut Spiral Cutterhead

Order No.: 803-4000
Specifications: for jointers, planers, planer/thicknessers, planer/wide belt sanders

This type of spiral cutterhead is designed with a true shear cut. It requires less horsepower, makes smaller chips and less noise than any other type of of cutterheads do. If one knife edge is dull or damaged, just turn it to another edge in seconds and the cutterhead works pefectly as a new one again. This greatly reduces your down time. Replace the inserts only when four edges are dull. You don’t need to replace all the knives as you have to do with the conventional single straight knife. It pays you back in a very short time.

Features:
* Custome sizes to fit your machines.
* Cutting length: 150mm to 1350mm
* Diameters range: 75 to 200mm
* Spirals: 6/9/12
* Carbide inserts 15x15x2.5mm
* Dynamically balanced
* High grade steel body.

Please specify the following information when you order or request for quote.
* Cutting length
* Cutting diameter
* Number of spirals
* Rotation direction of cutterhead when you look from the end of the
pulley to other end.
* Keyway sizes
* Bearing ends size
* Thread sizes

Order No. Cutting Length Number of Spiral
For jointers
803-4000 6” 6
803-4040 8” 6
803-4080 9” 6
803-4120 10” 6
803-4160 12” 6
803-4200 14” 6
803-4240 16” 6
803-4280 20” 6
803-4320 24” 6
For planers
803-4360 8” 6
803-4400 12” 6
803-4440 13” 6
803-4480 14” 6
803-4520 15” 6
803-4560 16” 6
803-4600 18” 6
803-4640 20” 6
803-4680 22” 6
803-4720 24” 6
803-4760 25” 6
803-4800 26” 6
803-4840 30” 6
803-4880 36” 9
803-4920 37” 9
For planer &sander
803-5000 630mm 6
803-5040 820mm 9
803-5080 1100mm 9
803-5120 1350mm 9

Copyright 2009 CTS Manufacturing Inc. All rights reserved.